Ceramic foam filter plate is produced basing on carrier with solid reticular structure and combined organic foam pores. The producing procedure is as below, put carrier into the thixotropic alumina slurry, adopt square to center correcting automatic extrusion process, so that slurry evenly deposits in foam skeleton of carrier, after drying solidification, then carrier will turn into final product by roasting formed under 1180   high temperature. Alumina ceramic foam filter are designed for filtration of aluminum and aluminum alloy.

Sealing gasket for Ceramic Foam Filter

Ceramic filter is surrounded by Sealing gasket, laying between filter and filter bowl, to prevent molten aluminum leaking through interface. Filter adopts sealing gasket in 3 different types, fiber paper material, fiber cotton material, expanding cotton material.( Thickness :5mm,8mm,3mm )

Features

1.Adopt adsorption principle for filter, can effectively remove big piece inclusions in molten aluminum, and effectively adsorb tiny inclusions.

2.No broken bits drop out, effectively reduce the pollution of molten aluminum.

3.Superior thermal shock resistance, improve erosion resistance ability of molten metal.

4.Automatic flow production 3 calibration procedures precision size fit the filter bowl tightly.

5.Improve the surface appearance and performance, purify molten aluminum.

Standard sizes for Ceramic Foam Filter

Dimension: 7x7in   9x9in   12x12in   15x15in  17x17in  20x20in  23x23in  26x26in

Thickness: 50 ± 2 mm

Special Dimension: square, rectangular, round, trapezoidal, abnormal, or customized as per the requirement.