Expendable Square Carbon Cup for CE-Meter

Expendable Square Carbon Cup for CE-Meter

Product Details:

  • Power 1.2 Megaampere ( MA)
  • Dimension(L*W*H) 52*52*65 Millimeter (mm)
  • Color Browinish Yellow
  • Capacity 21 Pcs/min
  • Application It is apply to measure carbon and silicon content of molten iron
  • Material The carbon cup is made of resin coated sand, straight quartz tube, T1 and T2 thermocouple wires and Sealing cement and other components.
  • Weight 50 Grams (g)
  • Supply Ability : 10000 Piece Per Day
X

Price And Quantity

  • 2000 Piece

Product Specifications

  • 2.25 Gram per litre (g/L)
  • 1250-1370 Celsius (oC)
  • 1.2 Megaampere ( MA)
  • 5 Millimeter (mm)
  • ± 10C
  • 1.2 Meter (m)
  • 21 Pcs/min
  • Temperature Sensor
  • 52*52*65 Millimeter (mm)
  • Browinish Yellow
  • 1250-1370
  • 1.2 Megapascals (MPa )
  • It is apply to measure carbon and silicon content of molten iron
  • 1250-1370 Celsius (oC)
  • 50 Grams (g)
  • Regular size
  • The carbon cup is made of resin coated sand, straight quartz tube, T1 and T2 thermocouple wires and Sealing cement and other components.
  • silica sand
  • The carbon test cups are used matching with the carbon and sulphur analyzer to quickly analyze carbon content, silicon content and carbon equivalent in molten iron, which can save smelting time of molten iron, greatly reduce production cycle of white and grey cast iron and therefore increase production efficiency.
  • The carbon test cups are used matching with the carbon and sulphur analyzer to quickly analyze carbon content, silicon content and carbon equivalent in molten iron, which can save smelting time of molten iron, greatly reduce production cycle of white and grey cast iron and therefore increase production efficiency.
  • temperature sensor
  • 52*52mm
  • K
  • mass production

Trade Information

  • TIANJIN SHANGHANG ,CHINA
  • Days after Acceptance (DA), Delivery Point (DP), Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C), Telegraphic Transfer (T/T), Western Union
  • 10000 Piece Per Day
  • 15-25 Days
  • Yes
  • Free samples available with shipping and taxes paid by the buyer
  • carton and pallet
  • Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
  • All India
  • Application The expendable carbon cup (thermal analysis cup) is for determining the Carbon equivalent, % Carbon and % Silicon in molten iron by using the principle of thermal analysis. The advantages of this carbon cup are as follows: 1. With Tellurium grain, the complete white iron solidification can be met 2. Fast thermocouple response 3. Precisely measuring the temperature of melting iron sample 4. Provide uniform cooling curve 5. High accuracy of the content of Carbon and Silicon 6. Improve the casting process control Determination of thermal stability of sample cup And Instrument Adjustment One: option of instrument and electric furnace Be sure to select the specific carbon silicon analyzer and hot metal within the specified test furnace. the replacement of components when the next test furnace hot metal will be change. Two: data testing methods Example: Thermal analysis of the test sample cup should be 3 to 5 consecutive (arrange it according the time), e.g. the test result of Si% is 1.80%, 1.82%, 1.86%, 1.88%, 1.90%. Testing is completed record data. Three: analysis Stability. According above testing result, the highest one is 1.80%, lowest one is 1.70%, fluctuation gap is 0.1, average value is 1.75% (±0.05). Instrument adjustment. If the chemical analysis of Si% molten iron content was 1.85% when the original apparatus should be set based on the si values of 0.1 and then raised to complete the adjustment (if the former setting of Si is -0,2, should change at -0.1). when test again, the content of Si% will become 1.85%, the adjustment is over, can work now. Four: attention 1)the hot metal temperature in the sample cup should not exceed 1350 ℃. 2)Optimum temperature of ductile iron is 1200 ℃ ~ 1250 ℃. 3)Optimum temperature of Gray Iron 250, 300 is 1250 ℃ ~ 1350 ℃ 4)The abnormal situation like low carbon high silicon hot metal composition will cause instruments to measure the normal C% and Si% no data.

Product Description

Expendable Square Carbon Cup for CE-Meter (Carbon and Silicon Analyzer)


Description :


The square expendable carbon cup is for determining the Carbon equivalent, % Carbon and % Silicon in molten iron by using the principle of thermal analysis.

 

  • Principle of measurement:Collection of temperature curves is conducted by microprocessor. Contents of carbon and silicon, and quality of molten iron can be calculated by crystallization process of molten iron.
  • The carbon cups are used matching with the carbon and sulphur analyzer to quickly analyze carbon content, silicon content and carbon equivalent in molten iron, which can save smelting time of molten iron, greatly reduce production cycle of white and grey cast iron and therefore increase production efficiency.
  • Easy to use, the thermal analysis cups are designed to achieve fast and reliable results from the thermal analysis of aluminum alloys. Though the high precision K-type thermocouples (Chromel/Alumel) or S type, the cooling curve and carbon content in molten metal can be measured.

 

Product Detail

Shape

Square or Round

Color

Browinish Yellow

Mouth inside length

36*36mm

Mouth outside length

52*52mm

Bottom outside length

45*45mm

Thickness

8mm

Application

to measure carbon and silicon content of molten iron

Product Keywords

thermal analysis sampling cup,te cup,sampling thermal cup

 

Other Products in 'Thermocouple' category



Get in touch with us
RFQ Request For Quotation
Get Quotes For Your Buying Requirement. Tell Suppliers What You Need.
I agree to abide by all the Terms and Conditions of tradeindia.com